Setting Up the PINpad

1. Connect the Moneris PINpad to the Moneris HiSpeed 6200:

a. Insert the "Terminal Connector" of the PINpad cable into the port labeled "RS232-1" with a GREEN bar on the terminal base.

b. Insert the "PINpad Connector" of the PINpad cable into the RS232 port on the back of the PINpad.

c. Attach the PINpad Cable Protector to the back of the PINpad.

2. Enable the PINpad on the terminal.

Return to Setting up the Terminal Hardware.

Note: If the terminal has been set up without the PINpad before and you have just added the PINpad, you will need to re-initialize before you can perform transactions again.