Power the terminal on and off

Follow the directions below to:

• Power on the terminal
• Power off the terminal
• Restart the terminal

Power on the terminal

1. Locate the thin power button on the left side of the terminal.
2. To power on the terminal, press and hold the power button for about 3 seconds until the screen turns on.

Note:      You may need to connect the terminal’s power cable in order to power it on. Refer to the instructions in Charging the battery for your setup type (e.g. the charge cable or the optional charge base).

Power off the terminal

1. Ensure that the terminal is not connected to a power source. If needed:

• Unplug the charging cable from the terminal; or
• Undock the terminal from the optional charging base.

2. Locate the power button on the left side of the terminal. Press the button until you see the menu on the right side of the screen.

A screen appears with five options: Power off, Restart, Screenshot, Services and Base.

3. Tap Power off.

The screen displays “Shutting down…”

1. The terminal powers off.

Restart the terminal

1. Ensure that the terminal is not connected to a power source. If needed:

• Unplug the charging cable from the terminal; or
• Undock the terminal from the optional charging base.

2. Locate the power button on the left side of the terminal. Press the button until you see the menu on the right side of the screen.

A screen appears with five options: Power off, Restart, Screenshot, Services and Base.

3. Tap Restart.

The screen displays “Restarting…”

1. The terminal shuts down and restarts.