The Configuration menu (see CONFIG FUNCTIONS below) contains a list of parameters and programs that can be enabled and configured on the iWL220 terminal.
IMPORTANT: A number of these programs require agreements between the merchant and a service provider other than Moneris Solutions. Please ensure that the necessary agreements are in place before attempting to configure those programs on the terminal.
The parameters and programs are listed in the order they appear on the menu. Some items may not appear on the terminal until another feature is enabled.
Click on the parameter in the CONFIG FUNCS column to go to the appropriate instruction page.
CONFIG FUNCS |
Allows you to: |
Initialize
the terminal to the Moneris Host. |
|
Configure
the communications (if not using Dial) and other
parameters that affect all transactions, e.g., tip entry and admin card protection. |
|
Configure
the parameters required to use a regular phone line to communicate
with the Moneris Host.Dial
communication is not supported on the iWL255. |
|
Configure the parameters required to use the Internet to communicate with the Moneris Host. |
|
Configure the parameters required to use 3G mobile communication to communicate with the Moneris Host. |
|
Register
the terminal to a communications base. |
|
Register
the terminal to a communications base. |
|
Configure Moneris Host parameters when Ethernet communication is enabled. |
|
|
Configure Moneris Host parameters when Ethernet communication is enabled. |
Configure
the receipt printing options including number of copies, signature
lines and trailer messages on your receipt. |
|
Configure
a terminal in order to use multi-terminal reporting. |
|
Configure
the terminal to display the Clerk ID prompt. |
|
Add
and remove Clerk IDs (if Clerk Totals is enabled). |
|
Configure
the Default Clerk ID on a terminal. |
|
Configure
the merchant name and tax type for processing purchasing and corporate
cards. |
|
Download
upgrades from the Moneris Host. |
|
Reset
all of the parameters on the terminal to the factory defaults. |
To navigate through the menus:
- Scroll down: press the
key
to move the
highlight bar
down.
- Scroll up: press the
key
to move the
highlight bar
up.
- Select a highlighted item: press
the
green
key.
For
information about the keys...
To access the CONFIG FUNCS menu from the READY screen:
1. Press the Admin key.
The MAIN MENU appears.
2. Scroll down to CONFIGURATION, and press the green key.
The CONFIG FUNCS menu appears.