Follow the directions below to:
§ power on the terminal.
§ power off the terminal.
§ restart the terminal.
To power on the terminal, press
and hold the green key
until the screen illuminates. Once powered on, proceed to Charging
the battery.
Note: You may need to connect the terminal’s power cable in order to power it on. Refer to the instructions in Charging the battery for your setup type (e.g. the charge cable or the optional charge base).
1. Ensure that the terminal is not connected to a power source.
2. Go to the Main Menu using one of these methods:
§ Tap the Main Menu icon on the screen (if it is available);
or
§ Press the Menu
key on the keypad.
3. On the Main Menu, tap Power Off.
The “This will power off this terminal.” message appears.
4. Tap OK or press the green key.
The terminal powers off.
Note: It is also possible to power off the terminal
using a keypad combination. Press and hold down the punctuation
key, then press the yellow
key. The terminal will power off.
Follow the directions below to shut down and restart the terminal.
1. Power off the terminal:
§ Press
and hold down the punctuation key,
then press the yellow
key.
2. Once
the terminal is powered off, press and hold the green key
until the screen illuminates.
3. Once the terminal displays the default screen, it is ready to use.