1. Unplug the terminal’s power cable from the power source and then replug it to restart the hardware.
2. On the PINpad, do the following:
a. As soon as the PINpad displays the CPX version screen, press the key within 3 seconds. |
|
b. When the “PIN/CARD BEEP” screen appears, go to the next step. |
|
c. Press the key until the “COM PORT” screen appears. |
|
d. Press the key until “USB-9600” appears. e. Press the key to select “USB-9600”. |
|
|
|
3. Go back to the Configuring Your Terminal procedures.