The Edit Terminal menu allows you to edit Terminal parameters.
Transactions menu (DEBIT & CREDIT) > CONFIGURATION menu (press the green OK key) > Setup menu > Terminal > Edit Terminal menu
Note: For instructions on navigation through the menus, see The Menu Feature.
IMPORTANT: Do Not Edit the parameters in this menu unless directed by Moneris. Only some of the menu's parameters are listed below. You can ignore all other parameters.
Sets a predetermined percentage of tip automatically added to Purchase transaction amounts (0-9999). If set to 0 (default) no tip is added.
Key in a percentage and press the green OK key.
Enables/disables tip prompting on Purchase, Pre-Authorization Completion and Advice transactions.
Enables/disables printing of the tip line on Pre-Authorization transaction receipts.
None (default)
On - Prompt
default = 15
default = 20
default = 25
The Sug Tip% 1 nn, Sug Tip% 2 nn and Sug Tip% 3 nn parameters determine up to three suggested tip amounts for gratuity guidelines printed on Pre-Authorization receipts.
Note: The Tip Processing and Gratuity Guide? parameters must be enabled.
The parameters also determine the suggested tip amounts displayed when Enhanced Tip Processing is enabled (EnhancedTipProc parameter is set to On).
Note: If all three parameters are set to 0, selecting % on Enhanced Tip Processing prompts the customer to key in a % amount (if an external PINpad is connected to your terminal, the options still appear showing 0%). The Gratuity Guide? parameter does not need to be enabled to use Enhanced Tip Processing.
Key in a percentage and press the green OK key.
Changes the manager password.
Key in password and press the green OK key.
Enables/disables the Clerk Id: prompt.
0 - None (default - disables)
2 - Prompt (enables)
Note: If the Use Def. Clrk? parameter is enabled, the prompt is disabled.
Sets the number of seconds the error message is displayed before the terminal returns the "Swipe or Insert Card:" prompt.
Key in number of seconds and press the green OK key.
The amount of the surcharge fee to be added to Debit purchase transactions.
The SurChg Option must be enabled and the Surchrg Msg Eng must be configured.
Key in the surcharge amount that will be added to transactions (max. 4 digits, e.g., 100 = $1.00. 50 = $0.50) and press the green OK key. This amount includes cents.
Sets the transactions types to which the surcharge fee is applied.
The SurChg Amount must also be set and the Surchrg Msg Eng must be configured.
None
Debit Cash Only (only on debit purchases that include a cashback amount)
Debit (all debit purchase transactions)
Sets the minimum dollar amount to which surcharge can apply (e.g. 0001 = $1.00). This amount excludes cents.
Note: The minimum value allowed is 0001.
Key in the Surcharge Min Limit and press the green OK key.
Sets the maximum dollar amount to which surcharge can apply (e.g. 5000 = $5000.00). This amount excludes cents.
Note: The maximum value allowed is 9999.
Key in the Surcharge Max Limit and press the green OK key.
Configures the PINpad type, if one is connected to the terminal.
IPP - Standalone mode (default).
External XPI - An external PINpad is connected. Select this option if you ordered the optional external PINpad.
None - No PINpad type set. Do not use.
Note: You must power down and then restart the terminal after switching the PINPad Type between IPP and External XPI.
Do Not change this parameter unless directed to do so by Moneris.
Sets the value of the PABX prefix that must be dialled to access an outside line.
Key in the prefix (min. 1, max. 4 alphanumeric characters) and press the green OK key.
Note: This value is listed as the " PABX Access Code" on the Terminal Parameters Report.
Do Not change this parameter unless directed to do so by Moneris.
Enables/disables the display of debit transaction Cashback pre-set amounts on the terminal and, if applicable, the external PINpad. On the terminal, the customer can also select Other to key an amount of their choice.
No - the customer must key in a cashback amount.
Yes - pre-set amounts are displayed for selection by the customer (default).
Note: The CashBack Option parameter must be enabled. The desired pre-set amounts are configured via the Amt 1, Amt 2 and Amt 3 parameters.
Do Not change this parameter unless directed to do so by Moneris.
Enables or disables manual entry of credit card numbers at the "Swipe or Insert Card:" prompt, or the "Swipe/Tap/Insert:" prompt.
OFF - Turns off manual card entry for the terminal. All credit cards must be swiped, tapped or inserted.
ON - Enables manual card entry for the terminal on credit card transactions
Disable - Disables the overall manual entry function, but enables individual card types to be configured to allow manual entry.
Note: Card types can be configured in the Edit Cards menu.
Sets the time format of the clock displayed on the transactions menu.
12 Hr (e.g. 02:24pm)
24 Hr (e.g. 14:24)
Enables/disables key beeping.
On (default)
Off
Enables/disables tax amount prompting on Purchasing Card transactions (the "xST Amt: $" prompt).
On
Off (default)
Note: You must enable the Commercial on? parameter. The Tax Type (xST) parameter is configured on the Moneris host.
Enables/disables settlement during Demo Mode.
On
Off (default)
Enables/disables the manager password prompt when a card number is manually entered during a transaction.
On (password prompt is displayed)
Off (default - no password required)
Enables/disables the Cashback Option on Debit transactions.
On
Off (default)
Note: The Show CB Choices parameter must be enabled. You can configure the pre-set cashback amounts (Amt 1, Amt 2, and Amt 3) that are displayed for selection by the customer. You can also configure the maximum dollar amount the customer can request as cashback (Amt Limit).
Do Not change this parameter unless directed to do so by Moneris.
Enables/disables processing of Purchasing Cards ( a.k.a., Commercial Cards or Corporate Cards).
On
Off (default)
Enables/disables printing of three suggested tip amounts on Pre-Authorization receipts.
On
Off (default)
Note: The Tip Processing parameter must be enabled. You can configure the amounts via the three Sug Tip% parameters.
Debit Pre-dial enables the terminal to begin dialing the host before data is entered by the cardholder during a Purchase, as a way to speed up dial transactions.
On (default)
Off
Enables/disables support for Partial Approval transactions.
On (default)
Off