Setting Up the Terminal Hardware

You must perform three steps to set up the terminal hardware:

1.  Power up the terminal.

Note: If you use an external PINpad with your terminal, you must set up the PINpad now.

Note: If you use a contactless reader, you must set up the reader now.

2.  Connect the communications cable. If you use
- Dial communications (including Dial backup for Ethernet) ...
- Ethernet communications ...

3.  Check the printer for paper:
Press the Paper Feed key twice to see if paper appears.

Note:  If no paper appears, load a paper roll in the printer.

Go back to Getting Started to finish installing the terminal.