Power the terminal on and off

Follow the directions below to:

§        power on the terminal.

§        power off the terminal.

§        restart the terminal.

Powering on the terminal

To power on the terminal, press and hold the green  key until the screen illuminates. Once powered on, proceed to Charging the battery.

Note:     You may need to connect the terminal’s power cable in order to power it on. Refer to the instructions in Charging the battery for your setup type (e.g. the charge cable or the optional charge base).

Powering off the terminal

1.      Ensure that the terminal is not connected to a power source.

2.      Go to the Main Menu using one of these methods:

§        Tap the Main Menu  icon on the screen (if it is available); or

§        Press the pound key on the keypad.

3.      On the Main Menu, tap Power Off.

The “This will power off this terminal.” message appears.

4.      Tap OK or press the green  key.

The terminal powers off.

Note:     It is also possible to power off the terminal using the keypad. Press and hold down the green   key for about 8 seconds until the terminal begins to shut down. If you continue to hold down the green key, the terminal will power off and restart.

Restarting the terminal

To restart the terminal, press and hold down the green  key for about 10 seconds. The terminal will restart.