Terminal connected to an external power source
The "lightning bolt" portion of the battery icon appears when the terminal is connected to an external power source.
To maintain battery charge, use any method below:
§ Charge cable : Connect this cable to the power port on the left side of the terminal, and plug the other end into a working power outlet.
§ Charge base: Dock the terminal on the optional charging base .
The battery icon displays in the status bar. The icon reflects the battery charge status/charge level.
Terminal connected to an external power source |
|
|
The "lightning bolt" portion of the battery icon appears when the terminal is connected to an external power source. |
Battery charge level |
||||
The coloured bars blink (one level at a time) when the battery is charging. |
||||
|
|
|
|
|
100% charge or less |
75% charge or less |
50% charge or less |
25% charge or less 1 |
0% charge 2 |
1 Recharge the battery as soon as possible. The terminal may power off. (Data will not be lost if this happens.)
2 The terminal will power off unless connected to a power source. (Data will not be lost if the terminal powers off.)
The terminal goes to the idle screen when it has not been used for a set time period. To exit this screen, press any key and respond to any security prompts that appear, for example, "Enter your clerk ID".
