key
to clear the message.Follow these steps to:
turn key beep on or off
set the terminal volume
set the backlight timeout value
set the idle timeout value
1. From the Main menu, tap Settings > Miscellaneous.
§ Respond to any security prompts that appear .
2. On the General Settings screen, you can change the following options or accept the default values:
Key Beep |
Tap the toggle to turn this setting on or off. When key beep is enabled, each time you press a key on the keypad, it will be accompanied by a beep. The terminal will also beep in other situations. |
Terminal Volume |
Tap the slider to turn the volume up or down for all terminal sounds. |
Backlight Timeout |
This option controls the amount of time (in seconds) that elapses before the screen and keys are dimmed when the terminal is not being used. The backlight timer begins after the idle timer has elapsed. To change the default value of 60 seconds, tap the field and enter a new value between 1 and 999. To disable the backlight timer, enter 0. |
Idle Timeout |
This option controls the amount of time (in seconds) that elapses before the idle screen appears. To change the default value of 60 seconds, tap the field and enter a new value between 1 and 999. To disable the idle timer, enter 0. |
3. When you are finished, tap Save.
4. When
“Settings Saved” appears, press the green key
to clear the message.
5. Do one of the following:
§ To go
to the default
screen, press the red 
key. Enter clerk ID
if needed.
§ To go
to the Main
menu, press the menu 
key.