Wireless Communication: Wi-Fi

The terminal is already set up to use long-range cellular communication (4G or 3G) to send and receive information to and from the Moneris host. The terminal communicates via 4G by default for faster communication and uses 3G as a fallback where 4G is not available. 

If you set up a Wi-Fi network, the terminal will switch to Wi-Fi when the Wi-Fi signal is stronger.

To setup a Wi-Fi network:

1. Press and hold the power button until you see the menu on the right side of the screen, then tap Base.

The terminal displays a list of the available Wi-Fi networks.

Note:     If no networks populate immediately, Wi-Fi may have been turned off and will turn on automatically after a few seconds.

1. Tap the network to which you want to connect.

The password screen appears.

1. Enter the Wi-Fi password and tap Connect.

Note:     There is 16-character Wi-Fi password limit.

Remove a Wi-Fi Network:

1. Swipe down from the top of the screen.
2. Press and hold the Wi-Fi icon.
3. The Wi-Fi menu appears, select the connected Wi-Fi network.
4. Tap "FORGET".

Related topics

Application setup