Powering Off the iWL220

To help reduce battery usage, power off the terminal when you are not using it and it is not on a powered base or connected directly to a power source via the direct-to-terminal charge cable.

To power off the terminal from the READY screen:

IMPORTANT: Ensure that the terminal is not docked on the base and/or is not connected directly to a power source.

Method #1

Method #2

1. Press the key.
The MAIN MENU appears.

2. Press the key again.
The ENTER ADMIN CODE entry screen appears.

3. Key in 49, and press the key.
The POWER OFF TERMINAL? prompt appears.

4. Press the key (YES).

The terminal powers off (the backlight goes off and the display screen goes blank).

Using this method to power off the terminal is only applicable if you begin from the READY screen.

Note: The READY screen must display a $0.00 value.

1. Press the key.
The POWER OFF TERMINAL? prompt appears.

2. Press the key (YES).
.
The terminal powers off (the backlight goes off and the display screen goes blank).

To power on the terminal...

To reset the handheld terminal, power off the terminal, wait 30 seconds, and then power on the terminal.