To recharge the battery in the terminal, dock the terminal on a powered base or use the direct-to-terminal charge cable to connect the handheld directly to a power source.
1. Confirm that both the Power icon and the Battery Charging icon (thin flashing bar below the Battery Charge Level icon) appear at the upper corner on the screen.
2. Locate the Battery Charge Level icon appearing at the top of left on the screen: Wait for this icon to indicate a charge of 100%. (The Battery Charging icon may continue to flash regardless of the charge level of the battery.)
3. Also note the following:
IMPORTANT: When the battery is being charged for the first time, the handheld must be docked on a powered base or be connected directly to a power source via the direct-to-terminal charge cable for a for a minimum duration of 3 hours.
The battery will re-charge only if it is not fully charged.
The battery will re-charge only when the terminal is not in use.
The Battery Charging icon will appear on the terminal display while the terminal is docked on the base and the battery is being charged.
The Battery Charge Level icon will appear on the terminal display while the battery is being charged.
4. If you are setting up the terminal for the first time, go back to "Getting Started."