Configuring the Receipt Format

This function allows you to configure the terminal to print a Pre-Authorization tip line and a signature line on credit card transaction receipts, set the number of receipt copies printed, and select which trailer messages to print on receipts (see receipt examples ) .

Note: "Declined" or "Not Approved" messages always appear in reverse font.  

From the READY screen:

To navigate through the menus:

- Scroll down: press the key to move the highlight bar down.
- Scroll up: press the key to move the highlight bar up.
- Select a highlighted item: press the  key.

For information about the keys...

1.  Press the  key.

2.  Scroll down to CONFIGURATION, and press the  key.
The CONFIG FUNCS menu appears.

3.  Scroll down to PRINTER CONFIG, and press the  key.

If the SWIPE ADMIN CARD prompt appears, swipe the POS admin card.

The PRINTER CFG menu appears.

Note: The default values for the following printer parameters are highlighted in reverse text (e.g., YES).

To start printing the receipt before all the transaction information is entered on the terminal:

DO NOT enable this feature:

a. Scroll down to PRE-PRINT, and press the  key.
The PREPRINTING? prompt appears.

b. Press the key to select YES.
The PRINTER CFG menu re-appears.

To select the number of receipts printed for a transaction:

a. Scroll down to NO OF COPIES, and press the  key.
The NUMBER OF COPIES menu appears.

b. Scroll down to the number of copies the terminal should print for each transaction, and press the  key at your selection. There are five options.
The PRINTER CFG menu re-appears.

To force the printer to pause between copies for a specified number of seconds:

a. Scroll down to PRINT DELAY, and press the  key.
The PRINT DELAY entry screen appears.

b. Key in the number of seconds the printer will wait between printing receipt copies, and press the  key. The default is 99 seconds.
The PRINTER CFG menu re-appears.

Note:  If, during the transaction, the operator does not want to wait for the receipt copies to print automatically, they can press the  key to force the next receipt to begin printing immediately.

To print a tip line on Pre-Authorization receipts for the customer to indicate a Tip amount (see receipt example ) :

a. Scroll down to P-A TIP LINE, and press the  key.
The PRINT PRE-AUTH TIP LINE? prompt appears.

b. Press the key tos elect YES.
The PRINTER CFG menu re-appears.

To print receipts for Advice transactions (see receipt example) :

a. Scroll down to PRINT P-A ADV, and press the  key.
The PRINT PRE-AUTH ADVICE? prompt appears.

b. Press the key to select YES.
The PRINTER CFG menu re-appears.

To print receipts for Pre-Authorization transactions (see receipt example) :

a. Scroll down to PRINT PRE-AUTH, and press the  key.
The PRINT PRE-AUTH? prompt appears.

b. Press the key to select YES.
The PRINTER CFG menu re-appears.

To suppress the printing of a Merchant copy of the receipt for a contactless credit Purchase that does not require cardholder verification:

Note: Merchant copy printing is enabled by default (i.e., set to YES).  Moneris recommends that you do not change this setting.  

a.  Scroll down to RCPT LIMIT-M, and press the  key.
The MERCHANT RECEIPT BELOW FLOOR LMT? prompt appears.

b.  Press the key (NO).
The PRINTER CFG menu re-appears.

To suppress the printing of a Cardholder copy of the receipt for a contactless credit Purchase that does not require cardholder verification: 

a.  Scroll down to RCPT LIMIT-C, and press the  key.
The CUSTOMER RECEIPT BELOW FLOOR LMT? prompt appears.

b.  Press the key (NO).
The PRINTER CFG menu re-appears.

To print one or more personalized messages at the bottom of receipts (see receipt example ) :

a. Scroll down to TRAILER MSG, and press the  key.
The ACTIVE TRAILER MSG menu appears.

b. Select and edit the trailer message for receipts.
The PRINTER CFG menu re-appears.

Press the key three times to return to the READY screen.