If your terminal will communicate with the Moneris Host over the Internet using public IP with dynamic addressing, you will need to set up these parameters.
From the READY screen (or the TERMINAL SETUP REQUIRED or REINITIALIZATION REQUIRED prompt):
To navigate through the menus:
- Scroll down: press the
key
to move the highlight bar down.
- Scroll up: press the
key
to move the highlight bar up.
- Select a highlighted item: press the
key.
For
information about the keys...
a. Press the
key.
The MAIN MENU appears.
b. Scroll down to CONFIGURATION, and press the
key.
The CONFIG FUNCS menu appears.
c. Scroll down to GENERAL PARAMS, and
press the
key.
The GENERAL PARAMETERS menu appears.
If the SWIPE ADMIN CARD prompt appears, swipe the POS Admin card.
d. Press the
key
to select COMMS TYPE.
The COMMUNICATION TYPE menu appears.
e. Scroll to ETHERNET, and press the
key.
The ETHERNET SETUP menu appears.
a. Press the
key
to select TERMINAL SETUP.
The TERMINAL SETUP menu appears.
b. Press the
key
to select TERMINAL TYPE.
The TERMINAL TYPE menu appears.
c. Scroll to DYNAMIC, and press the
key.
The TERMINAL SETUP menu reappears.
d. Press the key twice.
e. When the TCP HOST CONNECTION OK PRESS OK prompt appears, press the key.
f. If you are configuring the terminal for the first time, go back to "Configuring Communications."