Miscellaneous settings

Follow these steps to:

 

1.      From the Main menu, tap Settings > Miscellaneous.

§        Respond to any security prompts that appear .

2.      On the General Settings screen, you can change the following options or accept the default values:

Key Beep

Tap the toggle to turn this setting on or off.

When key beep is enabled, each time you press a key on the keypad, it will be accompanied by a beep. The terminal will also beep in other situations.

Terminal Volume

Tap the slider to turn the volume up or down for all terminal sounds.

Backlight Timeout

This option controls the amount of time (in seconds) that elapses before the screen and keys are dimmed when the terminal is not being used.  The backlight timer begins after the idle timer has elapsed.

To change the default value of 60 seconds, tap the field and enter a new value between 1 and 999.

To disable the backlight timer, enter 0.

Idle Timeout

This option controls the amount of time (in seconds) that elapses before the idle screen appears.  

To change the default value of 60 seconds, tap the field and enter a new value between 1 and 999.

To disable the idle timer, enter 0.

3.      When you are finished, tap Save.

4.      When “Settings Saved” appears, press the green  key to clear the message.

5.      Do one of the following:

§        To go to the default screen, press the red  key.  Enter clerk ID if needed.

§        To go to the Main menu, press the menu key.