Power the terminal on and off

Follow the directions below to:

• power on the terminal
• power off the terminal
• restart the terminal

Power on the terminal

1. Locate the power button  on the right side of the terminal.
2. To power on the terminal, press the power button for 2 seconds or until the screen illuminates.

Note:      You may need to connect the terminal’s power cable in order to power it on. Refer to the instructions in Charging the battery for your setup type (e.g. the charge cable or the optional charge base).

Power off the terminal

1. Ensure that the terminal is not connected to a power source. If needed:

• Unplug the charging cable from the terminal; or
• Undock the terminal from the optional charging base.

2. Locate the power button on the right side of the terminal. Press for 2 seconds.

A screen appears with four options: Airplane mode, Sound, Reboot, and Power off.

3. Tap Power off.

The Power off icon appears on its own.

3. Tap Power off again to confirm you want to shut down the terminal.

The screen displays “Shutting down…”

5. The terminal powers off.

Restart the terminal

1. Ensure that the terminal is not connected to a power source. If needed:

• Unplug the charging cable from the terminal; or
• Undock the terminal from the optional charging base.

2. Locate the power button on the right side of the terminal. Press for 2 seconds.

A screen appears with four options: Airplane mode, Sound, Reboot, and Power off.

3. Tap Reboot.

The Reboot icon appears on its own.

4. Tap Reboot again to confirm you want to shut down the terminal.

The screen displays “Shutting down…”

5. The terminal restarts.