Charging the Battery

To recharge the battery in the terminal, dock the terminal on a powered base.

Note: To confirm that a base is powered, dock the terminal on the base, and wait for the Power icon to display in the upper corner on the display screen (this may take several seconds).

1. Confirm that both the Power icon and the Battery Charging icon (thin flashing bar below the Battery Charge Level icon) appear at the upper corner on the screen.

2. Locate the Battery Charge Level icon appearing at the top of left on the screen: Wait for this icon to indicate a charge of 100%.  (The Battery Charging icon may continue to flash regardless of the charge level of the battery.)

3. Also note the following:

IMPORTANT:  When the battery is being charged for the first time, the handheld must be docked on a powered base for a for a minimum duration of 3 hours.

• The battery will re-charge only if it is not fully charged.

• The battery will re-charge only when the terminal is not in use.

4. If you are setting up the terminal for the first time, go back to "Getting Started."