Changing the Terminal Name

Use this function to assign a different terminal name to a terminal that has Multi-Terminal Report enabled on it.

IMPORTANT:  Do NOT attempt to configure your terminal without assistance from the Moneris Merchant Service Centre.

From the READY screen:

Note:  The terminal must be logged on before performing this configuration.

To navigate through the menus:

- Scroll down: press F1 to move the highlight bar down.
- Scroll up: press F3 to move the highlight bar up.
- Select a highlighted item: press OK.

1. Press the Admin key.
The MAIN MENU appears.

2. Scroll down to CONFIGURATION, and press OK.
The CONFIG FUNCS menu appears.

3. Scroll down to MULTI TERM CFG, and press OK.
The MULTIPLE TERM TRANSACTION? entry screen appears.

If the SWIPE ADMIN CARD prompt appears, swipe the POS Admin card.

4. Press F1 to select YES.
The MERCHANT TERMINAL NAME entry screen appears with the existing terminal name displayed in the bottom right corner of the screen.

5. Press CORR to clear the existing terminal name.

6. Key in the new terminal name (max. 6 characters) and press OK. (Entering Alphabetic Character and Punctuation)
The ALLOW CLOSE BY ADMIN 99? prompt appears.

7. If you wish to:
- use the Multi-Terminal Report function to remotely close the batch for this terminal, press F1 to select YES.
- use only the Close Batch function to close the batch on this terminal, press F3 to select NO.
The terminal communicates with the Moneris Host then returns to the READY screen.