The Ernex SETUP Menu

IMPORTANT:  Do NOT attempt to configure your terminal without assistance from the Moneris Merchant Service Centre.

The Ernex Configuration menu (see SETUP below) contains a list of parameters that can be enabled and configured on the Mobile 8200 terminal.

IMPORTANT:  The Ernex program requires an additional agreement between the merchant and Moneris Solutions. Please ensure that the necessary agreements are in place before attempting to configure those programs on the terminal.

 

The parameters are listed in the order they appear on the menu. Some items may not appear on the terminal until another feature is enabled.

SETUP

INITIALIZATION

Initializes the terminal to the Ernex Host
 

GENERAL PARAMS

Sets the format of the date printed on Ernex receipts.

Press OK to select DATE FORMAT.
The DATE FORMAT menu appears.

Select the date format, and press OK.
The GENERAL PARAMETERS menu reappears.

Press Can/Ann to return to the Ernex SETUP menu.

Press Can/Ann to return to the ERNEX menu.

PRINTER CONFIG

Sets up the Ernex voucher messages printed on the Ernex receipts.

Press OK to select VOUCHER HEADER.
The VOUCHER HEADER menu appears.
 

ENABLE ERNEX

Allows the terminal to process Ernex card transactions. (Default = YES)

The ENABLE ERNEX? prompt appears.

To allow the terminal to process Ernex card transactions, press F1.

The SETUP menu reappears.
 

DISABLE ERNEX

Stops the terminal from processing Ernex transactions. (Default = YES)

The DISABLE ERNEX? prompt appears.

To stop the terminal from processing Ernex card transactions, press F1.

The SETUP menu reappears.
 

PAYMENT APPL

Allows the terminal to process debit and credit card transactions.

The PAYMENT APPL ENABLED? prompt appears.

To allow the terminal to process debit and credit card transactions, press F1.

The SETUP menu reappears.
 

ROUTING CODE

Directs the Ernex transactions within the Ernex Host.

The ENTER ERNEX ROUTING CODE entry screen appears.

To accept the default code, press OK.
To change the default code, key in the 2-digit routing code provided by Moneris, and press OK.

The SETUP menu reappears.
 

COMMUNICATION

Tests the communication link between the terminal and the Ernex Host

The terminal begins to communicate with the Ernex Host to test the connection.

If the test is successful, the COMMUNICATION WITH ERNEX OK message appears.

Press OK to return to the ERNEX menu.

 

To navigate through the menus:

- Scroll down: press F1 to move the highlight bar down.
- Scroll up: press F3 to move the highlight bar up.
- Select a highlighted item: press OK.

 

To access the Ernex SETUP menu, from the READY screen:

  1. Press the ADMIN key.
    The MAIN MENU appears.

  2. Scroll down to ERNEX and press OK.
    The ERNEX menu appears.

  3. Scroll down to SETUP and press OK.
    The SETUP menu appears.

Top of page