Printing the Ernex Configuration Parameters List

When you have finished configuring Ernex on your terminal, perform this function in order to have a printed record of the terminal’s Ernex parameters. Included on the print-out are:

• Ernex software version number (Ernex Core Version)

• terminal identification information (Ernex Term ID)

• Moneris Merchant ID (Merch ID)

• configuration details for each card type downloaded from the Ernex Host (e.g., card description, whether Refunds are allowed for this card, etc.)

From the READY screen prompt:

To navigate through the menus:

- Scroll down: press F1 to move the highlight bar down.
- Scroll up: press F3 to move the highlight bar up.
- Select a highlighted item: press OK.

Note:  This will use quite a bit of paper, especially if there are a number of different Ernex cards configured.

1.  Press the Admin key.
The MAIN MENU appears.

2. Scroll down to ERNEX, and press OK.
The ERNEX menu appears.

3. Scroll down to REPORT FUNCS, and press OK.
The REPORT FUNCS menu appears.

4. Scroll down to CONFIG LIST, and press OK.

If the SWIPE ADMIN CARD prompt appears, swipe the POS Admin card.

The terminal displays PRINTING while it prints the report. When the report is finished printing, the terminal returns to the ERNEX menu.

5. Press Can/Ann to return to the READY screen.

Go back to Enabling Ernex Programs.