IMPORTANT: Do NOT attempt to configure your terminal without assistance from the Moneris Merchant Service Centre.
This menu allows you to configure the Ethernet Communications parameters.
The functions that appear on this menu vary according to the type of Ethernet Communications you select. Not all functions are available for every Ethernet Communication type.
The parameters and programs are listed in the order they appear on the menu.
For instructions, go to Communications Configuration and select the Ethernet Communications type the terminal will be using.
|
ETHERNET SETUP |
Allows you to: |
|
TERMINAL SETUP |
select the terminal type and enter terminal address information |
|
HOST SETUP |
select the host type and enter host address information |
|
DNS SETUP |
enter the Primary and Secondary DNS addresses |
|
Do NOT use this function unless directed to
do so by the Moneris Merchant Service Centre. | |
|
CONNECT T-OUT |
Do NOT use this function unless directed to
do so by the Moneris Merchant Service Centre. |
|
RETRY CONNECT |
Do NOT use this function unless directed to
do so by the Moneris Merchant Service Centre. |
|
ERROR REPORT |
Do NOT use this function unless directed to
do so by the Moneris Merchant Service Centre. |
To
navigate through the menus:
- Scroll down: press F1 to move the highlight
bar down
- Scroll up: press F3
to move the highlight
bar up
- Select a highlighted
item : press OK.
To access the ETHERNET SETUP menu, from the READY screen:
Press the Admin
key.
The MAIN MENU appears.
Scroll down to CONFIGURATION,
and press OK.
The CONFIG FUNCS menu appears.
Scroll down to ETHERNET
CFG, and press the OK.
The ETHERNET SETUP menu appears.