Select and Edit the Trailer Messages for Cardholder Receipts

There are 10 Trailer Message options available in each language.

Select one of the default messages (1 through 5) and edit it to suit your requirements or select a blank message (6 through 10) to create your own promotional message.

If you have customized a trailer message, you can reset the message to the original text.

IMPORTANT: If you edit or change an English trailer message, ensure that you also edit the corresponding French message. The trailer message that prints on the cardholder receipt is determined by the language on the card's magnetic stripe.
For example: If you select Option 1 and replace ' xxxxxx' with your company name in the English message, make sure to replace the ' xxxxxx' in the French Option 1 message as well.

Note: You can select more than one trailer message to print on your receipts. There are four lines per trailer message; each line can be from zero to 24 characters (if no double width is used) or from zero to 12 characters (if double width is used).  All characters are allowed.

To navigate through the menus:

- Scroll down: press the F1 key to move the highlight bar down.
- Scroll up: press the F3 key to move the highlight bar up.
- Select a highlighted item: press OK.

A. Select a trailer message option:

1.  Scroll down to the option on the terminal, and press OK.

2.  Select ENABLED (i.e. press OK).

3.  Press the F1 key to confirm that you wish to enable the trailer message.

B. Edit the trailer message option:

1.  Scroll down to the line number and language you wish to edit
(e.g. LINE 3 ENGLISH).

2.  Press the CORR key. (This deletes the entire line.)

Note:  A single message line can be from zero to 24 characters (if no double width is used) or from zero to 12 characters (if double width is used).  All characters are allowed.

3.  Key in the new text. ( Entering alphabetic characters and punctuation ).

Note: Once you have keyed in new text, you can use the CORR key to delete characters one at a time.

4.  Press OK to save the new line of text.

C. Format the font of the entire trailer message:

1.  Scroll down to the format you wish to apply to all lines of the message (BOLD, DOUBLE HEIGHT or DOUBLE WIDTH) and press OK.

2.  Press the F1 key to apply the format.

D. Press the Can/Ann key four times to return to the READY screen.

Go back to Configuring the Receipt Format .