A thermal printer is integrated into the Moneris HiSpeed 6200 terminal. It prints black text on white, one-part thermal paper.
IMPORTANT: Please observe the following recommendations for storing thermal receipt paper:
rolls should not be exposed to vinyl, plastics, adhesives, shrink-wraps, wet-toner copies or certain carbon papers
rolls should not be exposed to office or UV lighting
avoid storing in areas subject to high humidity (above 65% relative humidity)
avoid storing rolls in areas where temperatures rise above 25 degrees Celsius (77 degrees Fahrenheit)
To order additional paper rolls...
To load a new paper roll into the paper well on the terminal:
1. Open the paper well at the back of the terminal.
Press the printer latch towards the back of the printer then lift the printer
lid up and back.
2. Remove the paper roll that is in the paper well.
3. Place the new paper roll into the paper well with the loose end unrolling from the bottom of the roll towards the front of the terminal.
4. Pull the loose end of the paper towards the front of the terminal at least one inch (2.2 cm) past the metal teeth at the front of the paper well.
5. Close the printer lid and press firmly on it to ensure that it is securely latched.
6. Tear off the loose end of the paper by pulling it towards the keypad.
The printer is ready to print again.